Selection Guide FSH Welding Gas Shielded Flux-Cored Wires for build-up and hardfacing Gas shielded for assembling Open arc for build-up and hardfacing

Gas shielded flux-cored wire for economical hardfacing on carbon and alloy steels, subjected to moderate abrasion and moderate impact.

HARDFACING

Spool ø: .045” (1.2 mm)

Hardness (as welded) =55-60 HRC

4.5 kg

11.4 kg

Gas shielded flux-cored wire with slag, for economical build-up and hardfacing on carbon and alloy steels, subjected to moderate abrasion and impact. Excellent as a cushion before hardfacing with Soudocore FC 8332 W.

BUILD-UP

Hardness (as welded) =40HRC

Spool ø: .045” (1.2 mm)

4.5 kg

11.4 kg

Gas shielded flux-cored Ni-Cr-B-Si wire without slag, with a high content of tungsten carbide particles for hardfacing on carbon or low alloy steels, austenitic and ferritic steels subjected to extreme abrasion, acids and other corrosive agents.

HARDFACING

Hardness (matrix) =54-56 HRC Tungsten Carbides (WC) = 2360 HV

Spool ø: 1/16” (1.6 mm)

15 kg

Rm = Tensile strength Re = Yield strength E = Elongation